Everyone has been frustrated by a favorite article of clothing that will zip but won't unzip, or that zipper that gets stuck in mid-zip. Tugging, begging and pleading won't do the trick, but that does not mean it is a lost cause. Before you toss that prized leather jacket or comfy pair of jeans in the trash, try separating the zipper the next time you find yourself in a jam...so to speak.

Take any bar of soap, paraffin wax, or even candle wax and rub it on the inside of the zipper. Gently move the zipper up and down a tiny bit to work the wax into the "teeth" of the zipper.

If waxing the zipper doesn't do the trick, soak the zipper in vinegar or warm salt water for several hours.Test the zipper by slowly and gently moving it up and down.

Rub the sharpened end of a pencil over the zipper. The lead and graphite help to loosen the zipper by dissolving any rust.

Slowly move the zipper up and down until it feels like it is loosening up, at which point it is safe to try and unzip the item.If these household items don't work, WD40 and Elmer's Dry Spray Lubricant may be useful.

Don't force a stuck zipper up or down. If a bit of fabric stuck in the teeth of the zipper is the culprit, you will wind up with not only a broken zipper but a torn piece of clothing.Use caution when spraying WD40 on a zipper as it might damage fabric.

In today's world, zippers are a practically unavoidable convenience that help us keep our pants up and our bags closed. Despite their convenience, they're not perfect and can become stuck or broken. Broken zippers with missing teeth should be replaced altogether, but jammed zippers, caused by a misalignment of the metal teeth, are simple to fix at home.

Remove the metal stop at the bottom of the zipper with your pliers. The metal stop is the small metal band at the bottom of the zipping column that keeps the zipper slider from sliding right off.

Pull the zipper slider down to the bottom of the zipping column and realign it so that it will grab both rows of teeth evenly.

Pull the zipper slider upwards slowly, making sure it is evenly grabbing both rows of teeth.

Thread your needle with strong thread. Knot it firmly and make your first stitch at the back of the zipper, where the old metal stop sat.

Sew 8 to 9 stitches where the old metal stop sat. Your goal is to recreate the function of the metal stop with thread. You want your stitches to be thick collectively.

Knot your thread against the back of the zipper and cut off the remaining thread.For a zipper that's simply stuck, but still aligned well with the metal teeth, rub some candle wax around the slider and teeth.

There is only one place to buy zipper. yyzipper.com offers an impressive range of Metal zipper,Nylon zipper and Resin zipper, you will find all the information you need to choose the correct zipper for you.